Tag Archives: insulation

Sale after interior home repair

Interior Home Repair: Investing for Resale

Are you thinking about reselling your home? Whether it’s for now or you are planing ahead, it’s always a smart decision to invest in interior home repair. Practical (rather than aesthetic) remodeling projects demand the highest return on investment, and home repair is no different. It goes without saying that a dilapidated house will turn away potential buyers. Optimism in the housing market notwithstanding, make sure you’ve left nothing defective when you’re preparing your home for resale.

House Sellers’ Guide to Interior Home Repair

Home repair is important regardless of your plans to sell your home. However, putting it on the market should make repairs even more salient. Here are 10 top-priority projects to work on before you nail the “For Sale” sign into the lawn.

Basement

Wet basements are a common problem in rainy, humid South Florida. Make sure your basement is properly insulated and your runoff is far away from your house to prevent any leaks into the downstairs.

Circuit Breaker Safety

Making sure your circuit breaker is (a) correct and (b) properly functioning is not merely a matter of safety, but also law. Ground-Fault Circuit Interrupter (GFCI) outlets, which disconnect unbalanced conductors, are required in all residential bathrooms and kitchen countertops, so make sure you have one.

Drywall

Being one of the most obvious interior home repair concerns, holes or cracks in the wall are seldom unattended to. Nevertheless, it bears mentioning to scour your home for any damaged drywall that potential buyers may notice.

Electric Power Panel

No home inspector worth his or her salt will skip over your house’s electric power panel, so make sure it’s clean, free of broken fuses, etc. You may even want to consider upgrading your panel and factoring it into the resale value.

Garbage Disposals

Garbage disposals pose a major problem if they are not working properly. Even if it is working, make sure your disposal is also clean and there are no foul odors emanating from it. Don’t try to run any thin films (such as potato skins), and clear away grease with a simple vinegar and baking soda solution.

HVAC

With South Florida being as hot and humid as it is, you can be sure that both buyers and inspectors will investigate your air conditioning system. Hot temperature will be the first thing they notice upon entry, so invest the time into this interior home repair immediately.

Paint

Any paint that is cracked, faded, or discolored will greatly reduce the appeal of your home and should be attended to as soon as possible.

Plumbing Leaks

Leaking faucets and fixtures will cause odors and also lead to mold if they are in dark, secluded areas. Since most pipes are within the walls of your home, consider at least getting an inspection by a professional plumber.

Waste Lines

There are also sewage lines that run outside your home: namely, waste lines. Make sure your lets are draining and your septic tank is not leaking. If you have a drain snake on hand, use it to unclog anything that is obstructing the waste lines’ flow.

Water Heater

Lastly, ensure that your water heater is free of any sediment and is properly doing its job. A particularly important task will be replacing the sacrificial node of your water heater, and don’t hesitate to call a professional if you cannot fix your heater on your own.

Installing home insulation

Getting The Right Home Insulation

Insulation is a key component in home maintenance, and the practical reason is twofold. First of all, it’s a matter of comfort. In South Florida, home insulation determines how much cold air is let out, as well as how much hot air is let in. It’s also an economic concern (as well as an environmental one), as insufficient insulation will undoubtedly cause your energy bills to rise.

How Home Insulation Works

To find the right insulation for your home, you need to know about its “R-Value.” This is the standard measure of an insulating material’s resistance to heat flow, defined as heat transfer (difference in temperature) divided by a period of time. Simply put – higher R-Values translate to better insulation. And whether or not you know it, each room in your house has a recommended R-Value, so be sure to check with your contractor or maintenance/repair man on whether you have the right one.

Different Types of Insulation

When finding the right home insulation, another factor to consider is the type of insulation. As a jumping off point, here are the types utilized in homes accredited by the nonprofit Energy Star:

Batt Insulation

  • What: Made of fiberglass or another mineral fiber , which are then fitted into blankets of different thicknesses.
  • Where: Installed within walls to fill in any gaps or crevices.

Blow-In Insulation

  • What: Made of cellulose or fiberglass that is blown in with a hose.
  • Where: Completely and evenly fills the walls in an attic.

Sprayed/Injected Foam Insulation

  • What: Synthetic insulation that is generally composed of polystyrene and/or polyurethane foam that is expanded or fashioned into large sheets after manufacture. It is also available as a spray foam.
  • Where: Can be injected in basements, crawlspaces, and walls outside. As a sprayable foam, it can also be used to fill insulation cavities anywhere throughout the house.